Shop

Filters

Price
Axis
Reset
DJI DATA LINK 3 FOR AGRICULTURE REMOTE CONTROLLER
New
Remote Control

DJI DATA LINK 3 FOR AGRICULTURE REMOTE CONTROLLER

DESCRIPTION:-


It is compatible with DJI flight controllers such as DJI N3, DJI A3, DJI N3-AG, DJI A3-AG. It is also compatibel with other non-DJI flight controllers with SBUS protocol.
Datalink 3 includes a Ground System and an Air System, which can be operated at a 2.4 GHz frequency. The multi-functional ports on the Air System can satisfy user requirements in a variety of applications. Datalink 3 integrates the remote controller module into the Ground System, which comes with a number of aircraft and gimbal controls, as well as some customizable buttons. By using channel settings DJI ASSISTANT 2 for DJI series flight controllers, the buttons on the remote controller can be customized to perform common functions used in photography, mapping, and agriculture, etc. When used with either DJI MG or GS Pro apps, users will be able to see and adjust settings in real time, completing complex tasks more easily.

₹44999
DJI NAZA M-V2
New
Flight Controller

DJI NAZA M-V2

DESCRIPTION


  • All-in-one Design
  • Nine Types of Multi-rotors Supported
  • Free Ground Station Function
  • New Assistant Software for Smartphone
  • Independent PMU with amazing function extension
  • Enhanced Failsafe Mode
  • Two Levels of Low Voltage Protections
  • Multi-rotor One-power Output Fail Protection
  • Advanced & Improved Attitude Stabilization Algorithm
  • Multiple Flight Control Modes/Intelligent Switching
  • New Assistant Software & Firmware Online Update
  • GPS Module Available/Accurate Position Hold
  • iOSD mini supported
  • Intelligent Orientation Control
  • Motor Arm and Motor Dis-arm
  • PPM, S-BUS & Ordinary Receiver Supported
  • Independent LED Module
  • Built-in Gimbal Stabilization Function
  • Remote Gain Adjustment

₹14799
DJI NAZA M-LITE FLIGHT CONTROLLER
New
Flight Controller

DJI NAZA M-LITE FLIGHT CONTROLLER

All-In-One Design
For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.

 

₹7499
Carbon Fiber Tube 25*23*1000mm
Carbon Fiber

Carbon Fiber Tube 25*23*1000mm

Carbon fiber tubes are ideal for applications that require the highest bending stiffness and lowest weight, such as automation robotics, telescoping poles, idler rollers, and UAV components.

Strength is 8-10 times higher than ordinary steel, but weighs only about 1/5 of steel.

₹1249
Carbon Fiber Tube 20*18*1000mm
Carbon Fiber

Carbon Fiber Tube 20*18*1000mm

Carbon fiber tubes are ideal for applications that require the highest bending stiffness and lowest weight, such as automation robotics, telescoping poles, idler rollers, and UAV components.

Strength is 8-10 times higher than ordinary steel, but weighs only about 1/5 of steel.

₹1149
Carbon Fiber Tube 16*14*1000mm
Carbon Fiber

Carbon Fiber Tube 16*14*1000mm

Carbon fiber tubes are ideal for applications that require the highest bending stiffness and lowest weight, such as automation robotics, telescoping poles, idler rollers, and UAV components.

Strength is 8-10 times higher than ordinary steel, but weighs only about 1/5 of steel.

₹949
Carbon Fiber Tube 12*11*1000mm
Carbon Fiber

Carbon Fiber Tube 12*11*1000mm

Carbon fiber tubes are ideal for applications that require the highest bending stiffness and lowest weight, such as automation robotics, telescoping poles, idler rollers, and UAV components.

Strength is 8-10 times higher than ordinary steel, but weighs only about 1/5 of steel.

₹719
Carbon Fiber Tube 10*9*1000mm
Carbon Fiber

Carbon Fiber Tube 10*9*1000mm

Carbon fiber tubes are ideal for applications that require the highest bending stiffness and lowest weight, such as automation robotics, telescoping poles, idler rollers, and UAV components.

Strength is 8-10 times higher than ordinary steel, but weighs only about 1/5 of steel.

₹650
Carbon Fiber Tube 10*8*1000mm
Carbon Fiber

Carbon Fiber Tube 10*8*1000mm

Carbon fiber tubes are ideal for applications that require the highest bending stiffness and lowest weight, such as automation robotics, telescoping poles, idler rollers, and UAV components.

Strength is 8-10 times higher than ordinary steel, but weighs only about 1/5 of steel.

₹670
Hobbywing XRotor 20A ESC
ESC

Hobbywing XRotor 20A ESC

  •  Using Multicopter special program, fast throttle response,surpasses all kinds of open source software;
  • Firmware was optimized specifically for disc motor, and it has a very good compatibility;
  •  Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use;
  •  Throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight;
  •  Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal);
  •  Using MOSFET special driver IC, its performance and stability far surpass the driving circuit with discrete components built;
  •  Ultra-low resistance MOSFET, strong flow capacity.

₹749
Hobbywing XRotor pro 50A Dual Pack ESC
ESC

Hobbywing XRotor pro 50A Dual Pack ESC

  • Special core program for multi-rotor controllers greatly improves throttle response.
  • Specially optimized software for excellent compatibility with disc-type motors.
  • All settings except the "Timing" are preset, making usage simple, highly intelligent and adaptive.
  • The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable.
  • Compatible with various flight-control systems and supports a signal frequency of up to 621Hz (Note: all throttle signals over 500Hz are non-standard signals) .
  • Special drive chip has much better MOSFET driving effect than common driving circuit consisted of discrete components.
  • MOSFET with extra-low resistance brings high performance and great current endurance.

₹4999
Xrotor-PRO-40ACOB Dual Pack
ESC

Xrotor-PRO-40ACOB Dual Pack

  • Special core program for multi-rotor controllers greatly improves throttle response.
  • Specially optimized software for excellent compatibility with disc-type motors.
  • All settings except the "Timing" are preset, making usage simple, highly intelligent and adaptive.
  • The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable.
  • Compatible with various flight-control systems and supports a signal frequency of up to 621Hz (Note: all throttle signals over 500Hz are non-standard signals) .
  • Special drive chip has much better MOSFET driving effect than common driving circuit consisted of discrete components.
  • MOSFET with extra-low resistance brings high performance and great current endurance.

₹3999